2 0 0 3
VOLVO
S80
HomeLink® Universal Transceiver
HomeLink® is an advanced system that can be programmed to learn the codes of three different
remote controlled-devices (e.g., garage door openers, remote lighting, entry door lock).
HomeLink®'s sun visor-mounted transceiver, powered by your car's electrical system, may then be
used in place of your hand-held remote controls.
NOTE:
As a security precaution, the HomeLink® Universal Transceiver is designed to
not
function
if the car has been locked from the
outside
.
Programming the transceiver
1. The ignition switch must be turned to the "accessory" position (II) before programming the
HomeLink® Universal Transceiver.
2. Begin by erasing all 3 factory default channels. Hold down the two outside buttons (buttons 1 and
3 in the illustration) on the HomeLink® Universal Transceiver for about 20 seconds, until
HomeLink®'s indicator light begins to flash. Then release the buttons.
3. Hold your hand-held transmitter (garage door opener, for example) 2 to 5 in. (5 to 12 cm) away
from the HomeLink® surface, keeping the indicator light in view. For placement questions, contact
HomeLink® toll-free 1-800-355-3515 (Internet:
www.HomeLink.com
).
4. Using two hands, push and hold both your hand-held transmitter's button and the transceiver
button you wish to program. The indicator light will flash first slowly, then rapidly. Rapid flashing
tells you the HomeLink® button has been successfully programmed. Release both buttons.
5. If you are programming a rolling code-equipped device (e.g., garage door opener or entry door
lock), refer to "Programming rolling codes" on the next page to complete the programming process.
Repeat steps 3 and 4 to program the other two transceiver buttons.
HomeLink® Universal Transceiver (option)
pg. 151 HomeLink® Universal Transceiver (option)
Page 1 of 4
2003 Volvo S80
8/10/2005
http://apps.volvocars.us/ownersdocs/2003/2003_S80/03s80_11.htm
