B - Station seek up/down
Press the left side (lower frequency) or right side (higher frequency) of the button to start the seek
function. The radio seeks the next audible station and tunes it in. Repeat the procedure to continue
the seek function.
Audio system controls on the steering wheel
Station seek up/down
If you have a key pad in the steering wheel press the right or left arrow to switch between preset
stations.
Scan function
Press the SCAN button (HU-611) or the SOURCE button (HU-801) to start the station scan function.
When a station is found, scanning stops for several seconds, after which scanning will continue.
Press the SCAN or SOURCE button when a station has been found if you would like to listen to that
station and to discontinue the scan function.
A - Automatic station preset
This function seeks and stores up to 10 strong AM or FM stations in a separate memory. This
function is especially useful in areas where you are not familiar with the radio stations.
1. Press in the "AUTO" button for at least 2 seconds. A number of strong signal stations (max. 10)
from the currently selected waveband are now stored automatically in the memory. An "A" and
"AUTO" is displayed. If there is no station with sufficient signal strength "NO STATION" is
displayed.
2. Turn "1-20/DISC" button if you wish to change to another of the auto-stored stations. Another
auto-stored station is selected with each turn.
pg. 140 Audio systems HU-611/HU-801 - radio
Page 5 of 8
2003 Volvo S80
8/10/2005
http://apps.volvocars.us/ownersdocs/2003/2003_S80/03s80_10a.htm
