Volvo 1990 780 Model
2 Apply the parking brake, if not already set. Depress brake pedal firmly.
3 Place the gear selector lever in Park (or Neutral).
4 Without touching the accelerator pedal, turn the ignition key to the starting position. Release the key as
soon as the engine starts.
Avoid repeated short attempts to start (fuel is injected every time the starter is engaged when engine is
cold). Allow the starter to operate for a longer time (but no more than 15-20 seconds).
Do not race a cold engine immediately after starting. Oil flow may not reach some lubricating points fast
enough to prevent engine damage.
5 Select desired gear. The gear engages after a slight delay, especially noticeable when selecting R.
CAUTION:
Engine should be idling; never accelerate until after you feel the gear engage! Too-rapid acceleration
immediately after selecting a gear will harsh engagement and premature transmission wear.
NOTE: Selecting position P or N when idling at a standstill for prolonged periods of time will help
prevent overheating of transmission oil.
6 Release the brakes and accelerate
To stop the car, release the accelerator pedal and apply the brakes.
file:///K|/ownersdocs/1990/1990_780/90780_08.htm (6 of 7)12/30/2006 8:27:55 AM
