PTA Calibration
PTA (Power Trim Assistant) automatically adjusts the
trim angle to boat speed. The system has a basic set-
ting, but it is possible to set five different angles for five
different speeds.
On boats with more than one station and with several
displays it is enough to do the calibration on one dis-
play for it to be shown at all stations and on all displays.
For installations with several engines the calibration
needs to be made for each engine
1 Navigate from the settings menu to
PTA Calibra-
tion
. Press
to get to the submenu.
2 Use
to set the trim angle for idle, PTA
Pos 1.
Press
to confirm the setting.
3 Proceed to
PTA Pos 2
.
Use
to set the rpm.
Press
to confirm the setting.
4 Use
to set the trim angle.
Press
to confirm the setting.
5 Repeat steps 4 to 5 for Pos 3, Pos 4 and Pos 5.
6 To return to basic settings, select
Defaults
and
press
to confirm return to basic settings.
A
B
C
P0013204
A Trim position being set
B Engine rpm
C Trim angle
P0001232
Defaults
Calibration and Settings
124
47705992 05-2015 © AB VOLVO PENTA
Summary of Contents for D3
Page 1: ...OPERATOR S MANUAL D3 ...
Page 142: ...47705992 English 05 2015 ...
