44
21
Remove the main bearing caps and remove the
crankshaft. The main bearing caps are numbered and
must be reinstalled in their original positions. Socket
19 mm.
Remove piston cooling nozzles.
NOTE! Lock nuts should not be reused but should al-
ways be replaced with new ones. Socket 10 mm.
Removing cylinder liner
The cylinder liners should not be removed until it is
decided, after measurement or some other method,
that it is absolutely necessary that they are changed.
See “Cylinder liners, inspection and measurement”.
22
Remove the cylinder liners using tools 884 231, 884
551 and 884 888. The extractor consists of yoke
from 884 551 and center screw and puller nut from
884 231. The extractor is then used together with the
puller plate 884 888.
Repair Instructions
