User manual - EOLE T1
201906-383-ENG
P12
5. UE OF THE MACHINE (continued)
5.2. ATOMIZATION
• Prepare the surface to be painted (sanding, cleaning, etc . . .) .
•
Fill the bowl with paint (around 3/4 of the bowl).
•
Connect the turbine electrically and press the switch (A).
• For an optimal atomization, hold the spray-gun as horizontal a possible . The paint jet has to be
perpendicular to the surface to be painted, with a distance of about 20 cm.
• Proceed by crossed sections, horizontal and vertical, directing the diffuser head as needed .
•
Move the spray-gun with an uniform movement and a regular speed. Release the trigger at the end
of each section .
If the movement is too rapid, the risk of paint lack will be important. If, otherwise, the
movement is too slow, bleeding may occur.
• To avoid bleeding, press the trigger only after having begun the movement of the spray-gun .
• Do not try to cover everything in one layer, prefer applying a second one .
5.3. SPRAY SETTING
To increase or decrease the product flow-rate, use the wheel (B) at the back of the spray-gun:
- screw to decrease the flow-rate
- unscrew to increase the flow-rate
To obtain differents jets, direct the diffuser head as indicated below:
Head position
Spray render
Vertical flat spray
Horizontal flat spray
Round spray
