15
03
Output voltage
220Vac
230V (Default)
240Vac
04
Output frequency
50Hz (default)
60Hz
05
Power saving mode
enable/disable
Saving mode disable
(default)
If disabled, no matter connected
load is low or high, the on/off
status of inverter output will not be
effected.
Saving mode enable
If enabled, the output of inverter
will be off when connected load is
pretty low or not detected.
06
Overload bypass:
When enabled, the unit will
transfer to line mode if
overload occurs in battery
mode.
Bypass disable (default)
Bypass enable
07
Auto restart when overload
occurs
Restart disable (default) Restart enable
08
Auto restart when over
temperature occurs
Restart disable (default)
Restart enable
10
Charger source priority:
To configure charger
source priority
If this inverter/charger is working in Line, Standby or Fault
mode, charger source can be programmed as below:
Solar first
Solar energy will charge battery as
first priority.
Utility will charge battery only when
solar energy is not available.
Utility first
Utility will charge battery as first
priority.
Solar energy will charge battery
only when utility power is not
available.
Solar and Utility
(default)
Solar energy and utility will charge
battery at the same time.
Only Solar
Solar energy will be the only
charger source no matter utility is
available or not.
Summary of Contents for 1.5 KVA 12V
Page 1: ...1 5KVA 3KVA INVERTER CHARGER User Manual...
Page 2: ...Version 1 0...
