- 81 -
Fig.3
A = Shower area or bath
3.
Find the most appropriate position so as not to block access to the pull switch cord and the switch, at all
times respecting the safety distances indicated in Fig. 3. Mark the holes for mounting on the wall where
the heater is to be installed. Take the measure on Fig. 4 as reference. Mark a cross in the center of the
hole for more precise drilling. (See Fig. 4)
Fig.4
4.
Drill four holes on the cross using a drill with diameter of 8mm.
5.
Insert the four plastic pegs provided into the four holes.
6.
Hold tight to the wall mount and orient the heater making sure the grille faces towards you. Swing the
heater all the way down. Fix the wall mount and heater to the wall by applying two provided screws
through two holes on top of the wall mount using a screwdriver. (See Fig. 5) It is recommended to use
Summary of Contents for QH-104263.4
