Installation and Operation Manual | VOLTI Home Charging Device
9
4.1.1 Grounding the charging station
This product must be connected to a grounded permanent wiring system. Not properly grounding the
product will cause malfunction, the device will not be safe to operate.
4.1.2 Tools for installation
For installing VOLTI charging station, using the following tools is recommended.
Parts supplied with VOLTI charging station:
-
Mounting plate
-
Four (4) screws for securing VOLTI charging station to the mounting plate
-
Two (2) screws for securıng the mounting plate
Parts need to be supplied by the qualified electrician:
-
Ring terminal suitable for 6mm2 / 10 AWG cable
-
Phillips type screw driver
-
6mm2 / 10 AWG supply cable from
4.2
Installing VOLTI Charging Station
1. Secure the VOLTI charging station mounting plate to the wall using the appropriate screws for the
surface. You may use screws with bolts for metal surfaces, screws with fixing plug for walls.
The VOLTI charging station must be mounted at a height from the ground with the plug dock
measuring 0.6 meters to 1.2 meters from the ground per the IEC standards.
