42 (48)
ENG
g) If devices are provided for the con-
nection of dust extraction and collection
facilities, ensure these are connected and
properly used.
Use of dust collection can
reduce dust-related hazards.
h)
Do not let familiarity gained from frequ-
ent use of tools allow you to become com-
placent and ignore tool safety principles.
A careless action can cause severe injury
within a fraction of a second.
Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The
correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing access-
ories, or storing power tools.
Such preventi-
ve safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamili-
ar with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessores.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use.
Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits, etc., in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed.
Use of the power tool for operations diffe-
rent from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
Hold the appliance by the insulated grip-
ping surfaces when carrying out work
during which the screws or the accessory
tool may hit concealed power lines. If the
accessory tool or the screws come into con-
tact with a live wire, this may make exposed
metal parts of the power tool live and result
in an electric shock.
WARNING!
Do not use any accessories which have not
been recommended by VOLTGEAR. This
can lead to electric shock and fire.
WARNING!
Battery tool use and care
a) Charge a rechargeable battery using only
the charger recommended by the manu-
facturer. Chargers are often designed for a
particular type of rechargeable battery unit.
There is the danger of fire if other types of
rechargeable battery units are used.
b) Only the recommended rechargeable
battery units are to be used with an electri-
cal power tool.
The use of other rechargea-
ble battery units may lead to the danger of
injury or fire.
c) When they are not being used, store
rechargeable battery units away from pa-
perclips, coins, keys, nails, screws or other
small metal objects that could cause the
contacts to be bridged.
Short-circuiting the
contacts of a rechargeable battery unit may
result in heat damage or fire.
d) Fluids may leak out of rechargeable bat-
tery units if they are misused. If this hap-
pens, avoid contact with the fluid.
If contact
occurs, flush the affected area with water.
Summary of Contents for 7330027147925
Page 48: ......
