Regular cleaning of the fan is recommended. To clean the appliance:
1.
WARNING:
Ensure the appliance is switched off from the mains power
supply first using the all-pole switch installed in the fixed wiring. The LED
lamp must be allowed to cool sufficiently before cleaning.
2.
The facia can be simply removed from the fan and wiped over using a damp
cloth.
3.
The inner housing may be cleaned with a dry cloth or with a vacuum cleaner
with suitable brush attachment.
4.
Clean the exhaust ducting kit (if fitted), ensuring there are no obstructions
along the way or at the exit.
CAUTION:
To prevent damage to the appliance do not use alkaline cleaning agents
or solvents when cleaning, use a soft cloth and a mild detergent.
The LED Light source cannot be replaced.
Voltex Electrical reserves the right to make improvements or changes to all information, drawing, data
etc
contained and/or described herein at any time and at its own discretion without prior notice.
Voltex warrants all its ceiling fans against defective workmanship and faulty materials
for twenty-four (24) months from the original date of purchase. Please retain
proof of purchase and evidence of installation by a licensed electrician.
Voltex undertakes, at its option, to repair or replace, free of charge, each
appliance or part. Contact Voltex Electrical on 1300 722 275 (Australia) or
0800 55 66 33 (New Zealand) for any warranty claims.
®
Voltex Electrical 2015. All Rights Reserved.
P: 1300 722 275 E: [email protected]
Australia
P: 0800 55 66 33 E: [email protected]
New Zealand
www.voltexelectrical.com.au
www.voltexelectrical.co.nz
Voltex Electrical
OPERATION
REPLACEMENT LAMPS
WARRANTY & SERVICE
CARE INSTRUCTIONS
Exhaust fan and LED lamp may be operated individually or together.
