Operation
Ensure that the connection data for your USB device comply with the connec-
tion data for the product (see technical data).
Do not short-circuit the USB ports. Always switch the USB device that you
want to connect off before connecting it to the USB port.
Ensure that the connection is correct. If the product is not connected properly,
it could heat up or cause an electric shock or fire.
• Switch your USB device off and connect it to the USB port (type A)
(3)
on the product using
a USB cable (not included).
• Insert the mains plug
(1)
into a normal household mains socket. The working voltage is
100 - 240 V/AC.
•
The product automatically detects the charging specifications of the USB device and ad
-
justs the charging parameters accordingly. The USB device will start to charge.
• Disconnect the USB device to stop the charging process, or when charging is complete.
• Always switch the connected USB device off before unplugging it from the USB charger.
• Remove the USB charger from the mains socket after use.
Care and cleaning
• Disconnect the product from the power supply before cleaning. Do not clean it with water
or immerse it in water.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the housing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product.
• Always keep the mains plug and the mains socket clean.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
the applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical data
The efficiency data are compliant with the ecodesign requirements set out in Annex II of EC
Regulation 2019/1782.
Input voltage ...............................................100 - 240 V/AC
Input AC frequency .....................................50/60 Hz
Output voltage ............................................5 V/DC
Output current .............................................2.4 A
Output power ..............................................12 W
USB type ....................................................USB-A
Efficiency class
...........................................VI
Average active efficiency
............................83.49%
Efficiency at low load (10%)
.......................75.76%
No-load power consumption .......................<0.1 W
Colour .........................................................White
Operating conditions ................................... 0 to +25 ºC, 20 - 85 % relative air humidity
(non-condensing)
Storage conditions ...................................... -20 to +60 ºC, 10 - 90 % relative air humidity
(non-condensing)
Dimensions (W x H x D) .............................36 x 34 x 32 mm
Weight ........................................................40 g
Model identifier:
UC-1AXX001
Commercial registration
number:
HRB 3896
Address:
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming or capture in electronic
data processing systems, requires the prior written approval of the publisher. Reprinting, also in part, is prohibited. This
publication reflects the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*2274810_v1_1120_02_DS_m_4L_(1)
