OPERATING INSTRUcTIONS
VERSION 10/12
PLUG-18W UNIVERSAL POWER ADAPTOR WITh
ADAPTOR PLUG
ITEm NO.: 51 51 00
INTENDED USE
This product allows the operation of low-voltage consumers. It features a USB output and an additional
power outlet. Moreover, there is an output with eight variable output plugs and seven output voltages are
selectable. Voltage supply is provided by a mains outlet.
Only for use in dry interior environments.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
DELIVERy cONTENT
Power adaptor
•
8 x output plugs
•
Voltage setting key
•
Operating instructions
•
SAfETy INSTRUcTIONS
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
a)
Do not connect in series.
•
De-engergised only when unplugged.
•
Never pour liquids over electrical appliances and never leave objects filled with liquids (e.g.
•
vases) on it or in the vicinity. There is a high risk of fire or life-threatening electric shock.
Always lay the cables so that nobody can trip over or become entangled in them. This poses
•
a risk of injury.
Check the product for damage(s) each time before use. If you discover any damages, do not
•
use the product. Disconnect the power supply and unplug the mains adapter from the wall
outlet. Then bring the product to a specialised workshop.
The product should not be used immediately after it has been brought from an area of cold
•
temperature to an area of warm temperature. Condensed water might destroy the product. Wait
until the product adapts to the new ambient temperature before use.
Do not pull the mains adapter out of the wall outlet by its cable!
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous
•
playing material for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
•
moisture, flammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it from
•
any accidental use. Safe operation can no longer be guaranteed if the product:
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
-
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
•
the product.
Also observe the safety and operating instructions of any other devices which are connected
•
to the product.
miscellaneous
b)
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
•
qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not covered by
these operating instructions, please do not hesitate to contact our technical support or another qualified
specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 180/586 582 7.
Legal notice
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7
(www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© copyright 2012 by Voltcraft®
OUTPUT PLUG SPEcIfIcATIONS
Output plugs
Ø outer
Ø inner
D 5 mm
2.1 mm
G 5.5 mm
2.5 mm
H 3.5 mm
1.35 mm
I 4 mm
1.7 mm
N 5.5 mm
1.5 mm
S 2.35 mm
0.75 mm
A 2.5 mm
B 3.5 mm
OPERATION
Always turn off the electrical load before plugging / unplugging the in-car adaptor to the
product. Ensure it is correctly connected. If the product is connected improperly, it may
heat up or cause electric shocks, fire, etc.
Plug the product into a mains outlet.
Power outlet
a)
The power outlet on the top of the power adaptor provides the voltage supply to products.
USB connection
b)
Connect a suitable USB cable (not included in delivery) to a USB port on the product.
1.
Connect the USB cable to the electrical device.
2.
Output plug
c)
Use the key to set the required voltage.
1.
Connect a low-voltage consumer to the product using one of the output plugs.
2.
Make sure the output plugs are used with the correct polarity. Observe the respective polarity symbol - ○)+
3.
or - (○+ for the correct setting.
Insert the connector in such a way that the arrow under the corresponding polarity symbol points to the
4.
arrow of the charging cable’s low voltage socket. The connector is designed to make unplugging relatively
difficult.
After use, disconnect the product from the supply voltage.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
TEchNIcAL DATA
Input voltage .......................................................... 100 – 240 V/AC, 50/60 Hz
Input current .......................................................... 400 mA
Dimensions (W x H x D) ........................................ 125 x 50 x 81.5 mm
Cable length .......................................................... 1.5 m
Power outlet:
Output voltage ....................................................... 230 V/AC, 50/60 Hz
Output current ........................................................ 16000 mA (max.)
USB connection:
Output voltage ....................................................... 5 V/DC
Output current ........................................................ 2100 mA
Output plug:
Output voltage (V/DC)
5
6
9
12
15
18
24
Output current without USB (mA)
3000
2500
2000
1500
1200
1000
750
Output current with USB (mA)
900
750
833
625
500
417
313
Max. power consumption (Watt)
15
15
18
18
18
18
18
