35
11
Short press to output 0% value of the currently set range, long press to reset the 0%
value.
12
Short press to decrease output by 25% of the range.
13
Short press to increase output by 25% of the range.
14
Short press to output the 100% value of the currently set range, long press to reset
the 100% values.
15
Mode selection.
16
Select TC (Thermocouple), select the graduation of thermocouple.
17
Measurement mode.
18
Voltage measurement/output.
19
Power on/off.
8. System setup
To enter system setup menu:
1. Press for more than 3s to power on. LCD will display the model number.
2. Long press
to enter system setup menu.
3. Press the arrow keys to change parameters.
4. Short press
to exit the setup menu.
a) Auto power off
Press
to select AUTO POWER OFF, then press
to set auto power off time. The AUTO POWER OFF time
will start when no button is pressed, the counting will restart if any button is pressed. The max. AUTO POWER OFF
time is 60 minutes, “0” means the auto power off function is disabled.
b) Brightness
Press
to select the BRIGHTNESS, then press
to adjust the screen brightness. Press on setup menu
to rapidly adjust the brightness.
c) Remote control
Press
to select REMOTE CONTROL, then press
to set up for remote PC control.
d) Button beep control
Press
to select BEEP CONTROL, then press
to set button sound. ”Beep” once enables button sound,
“Beep” twice disables button sound.
Summary of Contents for 2389432
Page 47: ......
