• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs may only be carried out by a technician or
a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical safety
• The mains socket must be located near to the device and be easily accessible.
• Never unplug the mains plug by pulling on the cable. Always use the grips on
the plug.
• Unplug the mains plug from the mains socket if you do not plan to use the product
for an extended period of time.
• For safety reasons, unplug the mains plug from the mains socket during a
thunderstorm.
• Ensure that the mains cable is not squeezed, bent, damaged by sharp edges
or subjected to mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable. Failure to adhere
to these instructions may lead to damage to the mains cable. A damaged mains
cable can cause a fatal electric shock.
• Do not touch the mains cable if there are any signs of damage. Power down the
respective mains socket (e.g. via the respective circuit breaker), and then carefully
unplug the mains plug from the mains socket. Never use the product if the mains
cable is damaged.
• Damaged mains cables must be replaced by the manufacturer, an authorised
repair centre or a qualified electrician.
• Never plug in or unplug the mains plug when your hands are wet.
• Do not tie any threads or similar to the cables of the power adapter.
• Before connecting the product to the mains, make sure that your local AC mains
voltage matches the specifications on the nameplate.
• This device was constructed according to protection class II. Only connect the
mains plug to a standard mains socket (230 V/AC, 50 Hz) connected to the public
grid.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Switch off the mains voltage to the socket containing
the power adapter (switch off the corresponding circuit breaker or remove the
safety fuse, and then switch off the corresponding RCD protective switch). You
can then unplug the power adapter from the mains socket. Dispose of the faulty
power adapter in an environmentally friendly manner and discontinue its use.
Replace it with a power adapter of the same design.
• Never use the product immediately after it has been brought from a cold room into
a warm one. This may cause condensation to form, which can destroy the product.
The power adapter may also cause a fatal electric shock!
• Allow the product to reach room temperature before connecting it and putting it
into use. This may take several hours.
• Never pour liquids over electrical devices or place objects filled with liquid next to
the device. If liquid or an object enters the interior of the device nevertheless, first
power down the respective socket (e.g. switch off the circuit breaker) and then pull
the mains plug from the mains socket. Discontinue use and take the product to a
specialist repair centre.
c) Persons and product
• The product may only be used in dry, enclosed spaces. The product must not
become damp or wet.
• Place the product on a stable, level, clean and sufficiently large surface.
• Do not place the product on valuable furniture without using suitable protection.
Otherwise, there is a risk of scratches, pressure points and discolouration.
• Do not place the product on a flammable surface (e.g. a carpet or tablecloth).
Always use a suitable non-flammable, heatproof surface.
• Keep the product away from flammable or combustible materials (e.g. curtains).
• Children must only use this product when supervised by an adult.
• Keep cables and the product away from sources of heat.
• The product generates heat during use. Ensure that there is sufficient ventilation.
Do not cover the product during use. Ensure sufficient ventilation of the product
during operation. Do not use it in bags, under duvets or in cupboards.
• Do not insert sharp objects into the ventilation openings on the product. There is
a risk of electric shock.
• If you notice unusual odours or smoke, disconnect all connectors on the cables
immediately.
Operating instructions
USB-C™ table charger
Item no. 2268914
Intended use
This product is designed to charge and power a compatible USB device with a USB-C™
connection. The USB-C™ output on the device also provides a quick-charge port. The voltage
is supplied through the supplied mains cable, which should be connected to a standard
household mains socket. The product is protected against overload, voltage surges and short
circuits. It also has overheat protection.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture
(e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short-circuit, fire or electric shock. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names included herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Table charger
• Mains cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Description of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the
product.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may cause a fatal electric shock!
This symbol indicates that this product is built according to protection class II. It is
equipped with reinforced or dual insulation between the mains circuit and the output
voltage.
This symbol indicates that the product meets the energy efficiency requirements for
Class VI.
This product has been CE-tested and meets the necessary national and European
guidelines
Safety information
Read the operating instructions carefully and the safety information in
particular. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
