40
H function buttons
MODE button for switching between different modes
RANGE button for manually selecting the measurement range
LPF button for enable the low-pass filter in V-AC mode
MAX/MIN function for displaying the maximum and minimum measured values
Hz% key for switching between the frequency and pulse duration display
REL button for reference value measurements
I COM measurement terminal (reference potential, “negative”)
J Multifunction thread (1/4” UNC, tripod socket) for optional accessories
G VΩ measurement terminal (“positive potential” for direct voltages)
L HOLD function button for holding the measured value and for the LED light
M Battery compartment
N LED light
7. Product description
The digital multimeter (DMM) displays measurements on a backlit digital display. The DMM has a 6000-count display
(count = smallest display value). The display can display values from 0 to 5999.
The VC-532 is designed to measure alternating currents up to 1000 A.
The VC-533 is designed to measure alternating and direct currents up to 1000 A.
The multimeter switches off automatically after a period of inactivity. This protects the batteries and extends the bat-
tery life. The automatic power-off feature can be disabled.
The DMM can be used to take measurements up to CAT III. It is suitable for use in hobby workshops and professional
applications.
Protective caps may be attached to the angled test lead plugs. Remove these before inserting the test leads into the
multimeter.
Rotary dial (F)
The measurement modes are selected using the rotary dial. Automatic range selection (“AUTO”) is enabled in some
measurement modes. This sets the measurement range automatically.
To turn the multimeter off, move the control dial to the “OFF” position. Always turn the multimeter off when it is not in
use.
