45
Turning the laser on/off
The target laser can be turned on and off. Turning off the laser is necessary to measure highly shiny or reflective
surfaces to prevent uncontrolled beam deflection.
Turn the measuring device on by briefly pressing the measuring button (5).
Select the settings menu
with the “MODE” button within the pre-set power-off time.
Turn the target laser on/off with “F3” via the “Laser” function. Press the button once to turn on the function and again
to turn it off. The activated laser function is indicated with the laser icon (E) on the display.
Never look directly into the laser outlets. Always observe the safety information included in these operating
instructions.
Alarm function "Hi/Lo"
The measuring device is equipped with an optical and acoustic alarm function. The alarm can be set and activated
separately for over-temperature “Hi” and under-temperature “Lo”.
The alarm sounds when the set temperature value is exceeded or fallen below. The symbol (Hi/Lo) starts to flash and
the display lights up red. The alarm is triggered when the lower alarm value “Lo” is fallen below or the upper alarm
value “Hi” exceeded.
Turn the measuring device on by briefly pressing the measuring button (5).
Select the settings menu “Hi/Set/Lo” with the “MODE” button within the pre-set power-off time.
Setting the alarm
Select with “F1” the settings menu for the upper alarm value “Hi” or with “F3” the settings menu for the lower alarm
value "Lo".
Set the alarm value with “F1” and “F3”. Press and hold the button. This will change the decimal place after a short
time to more quickly set larger values.
The smallest setting interval is 0.1 up to 999.9 and from 1000 in intervals of 1.
Turn the alarm on/off with “F2”. The menu function for “F2” shows the current status of each alarm. Press the button
to change the status:
Off = disabled
On = activated
In addition, the corresponding alarm function is indicated on the display with the symbol “Hi” or “Lo” .
Press the measuring button (5) or “MODE” to confirm your input. The settings are saved.
