42
18. Warning Messages on the Display
REVERSE POLARITY
CONNECTION BREAK
CONNECT error
Check Main Port
BALANCE CONNECT
ERROR
DC in too low
DC in too high
CELL error
Low Voltage
CELL error
High Voltage
CELL error
Voltage-Invalid
CELL number
Incorrect
Int.temp.too hi
Ext.temp.too hi
Over charge
Capacity Limit
Over TIME LIMIT
BATTERY WAS FULL
The polarity of the rechargeable battery connections has been switched.
The connection to the rechargeable battery has been disrupted, e.g. if the
battery has been disconnected during the charging process.
The rechargeable battery was connected with reversed polarity.
The balancer connection of the rechargeable battery has been connected in-
correctly or with reversed polarity.
The input voltage (at the direct voltage input) for the charger is too low
(< 11 V).
The input voltage (at the direct voltage input) for the charger is too high
(> 18 V).
The voltage of a cell of a connected lithium rechargeable battery is too low.
The voltage of a cell of a connected lithium rechargeable battery is too high.
The voltage of a cell of a connected lithium rechargeable battery cannot be
measured correctly.
The set cell number is wrong.
The inner temperature of the charger is too high.
The temperature measured at the rechargeable battery via the external tem-
perature sensor (not enclosed, can be ordered separately) is too high.
The set capacity limit (see chapter 17) has been exceeded.
The set time limit for charging (see chapter 17) has been exceeded.
The connected rechargeable battery is fully charged. If required, check the
cell number settings.
Summary of Contents for 1528380
Page 1: ...Operating Instructions Multifunctional charger V Charge 300 Triple Item No 1528380 ...
Page 46: ...46 ...
Page 47: ...47 ...
