ASSEMBLY
13
The chain brake ensures immediate blocking of the saw chain in case of kickback. Before beginning work with
the device, it should be checked to ensure that it is functioning correctly.
1. Set the device on the ground.
2. Start the device.
3. Tip the front hand guard forwards. The chain should stop immediately.
4. If the chain brake is not working correctly, contact a service partner immediately.
1. Lay the device down in a secure position with the oil tank cover upwards.
2. Before opening, clean the oil tank cover if necessary.
3. Remove the oil tank cover by rotating anticlockwise.
4. Carefully fill up with saw chain oil. Do not spill. If you do spill any saw chain oil, be sure to wipe it up.
5. Read the oil level at the oil level window.
6. Attach the oil tank cover by rotating clockwise.
Note:
This device contains an automatic oil pump that services the chain. The remaining oil level can
be checked through the oil level window.
Checking the Chain Brake
Chain oiling
NOTICE! Environmental damage!
Since the saw
chain oil can penetrate the environment during
operation, only biologically degradable vegetable-based
saw chain oils should be used.
