4
5
Instruction for Use
• To retract the cord, switch off the
appliance and unplug it from the
wall socket. The vacuum cleaners
has an integrated cord winder.
To rewind the cable press the foot
pedal gently and guide the cord by
one hand, this will prevent it striking
you or damaging the cleaner.
SWITCHING ON
Extend the cord and plug it into the
wall socket. A yellow mark on the
power cable shows the ideal cable
length. Don’t extend the cable beyond
the red mark.
• Press the On/Off button to switch
the unit on. To stop, press the
button again.
On/Off switch
Rewind
Red Mark
Yellow Mark
ACCESSORIES
Use the appropriate accessory
according to the object(s) to be cleaned:
•
Crevice nozzle
For corners, between cushions and
difficult-to-reach places.
• Upholstery nozzle
For upholstered furniture and curtains.
• Combination floor nozzle
Can be set for hard floors or carpets.
Carpet
Hard floor
INSTRUCTION FOR USE
The combination floor nozzle can
be set for hard floors or carpets.
Press the foot operated toggle
lever on the floor nozzle to select the
desired setting. When the floor nozzle
is set for hard floors, the bristles
will extend beyond the base of the
floor nozzle. When the floor nozzle
is set for carpets, the bristles will
be retracted.
Maintenance
EMPTYING THE DUST CONTAINER
Note: Before removing the dust
container, switch off the appliance
and disconnect the flexible hose.
• Remove the dust cup by pushing the
open buttons on the dust container
handle. Remove the content of the
dust cup by pushing the opening
button.The dust container is a
detachable unit. Hold the base of the
dust cup with one hand and open
the dust container by pushing the
opening button with the other hand.
• Empty the dust container.
• To close the dust container, ensure
that hinge is securely fasten before
you locked the cover.
• Replace the dust container, always
operate the appliance with
the dust container properly installed.
REPLACING AND CLEANING
THE MOTOR FILTER AND
EXHAUST FILTER
• Filter for air-inlet should be cleaned
at least twice a year or when it
becomes visible solid.
• Always operate the cleaner
with filters.
• To avoid reduced suction or
motor damage.
• Remove the dust container as
described in the previous section.
• There are two pre-motor filters
in this vacuum cleaner, a spongy
grey protection filter, and the
framed filter.
• Remove the filter frame from the
container by pulling on the release
tab on the top right side of the filter
frame. Remove the grey protection
filter by simply pulling it loose from
the container.
INSTRUCTION FOR USE / MAINTENANCE
