5. Close the filter cover.
Replacement Filter Part number: Menalux D09.
Note: Do not use cleaning agents and avoid touching
the delicate filter surface
.
CLEANING THE HOSE AND NOZZLE
The vacuum cleaner stops automatically if the
nozzle tube or hose becomes blocked, or the filter
and dust bag are blocked. Disconnect from the
mains and allow to cool down for approximately 20
– 30 minutes.
Clear what ever is causing the blockage and /
replace dirty filters or the full dust bag. Then start
the vacuum cleaner.
Tubes and hose
1. Use a flexible hose or similar item to clear the
tubes and hose.
2. It is sometimes possible to clear the hose by
“massaging” it. However, be careful in case the
obstruction has been caused by glass or
needles caught inside the hose.
Note: The warranty does not cover any damage to
hoses caused by cleaning them.
6.
Cleaning the floor nozzle
3. To avoid reduction in suction power, frequently
clean the dual purpose floor nozzle. The easiest
way to clean it is by using the hose handle.
MAINTENANCE
