background image

Troubleshooting and customer information

7.

Trouble Shooting
Power

The vacuum cleaner does not start.

1.  Check that the cable is connected to the mains.
2.  Check that the plug and cable are not damaged.
3.  Check for a blown fuse.

 

The Vacuum Cleaner stops

1.  Check whether the dust bag is full, if so, replace  

 

it with a new one.

2.  Is the nozzle, tube or hose blocked?
3.  Are the filters blocked?

 

Blockages, full dust bags, and dirty filters can result 
in the machine switching off in operation due to 
the restriction of air flow causing the activation of 
the thermal overload. If this does occur, switch off 
at both the cleaner and at the mains and remove 
the plug.
Allow the cleaner to cool for 20 – 30 minutes, in 
this time check the hose, tubes and floor nozzle for 
blockages.

( a )  To check for a hose blockage pass a small 
coin through it, on finding the blockage, remove 
it by pressing the hose to dislodge and loosen the 
obstruction. How ever be careful in the case it has 
been caused by glass or needles caught inside the 
hose at the point of the blockage.

( b ) By passing a hard flexible tube through the
hose from the handle end the obstruction can also 
be dislodged and removed.

If the obstruction cannot be removed please consult 
the Blue Ribbon service provides listing supplied 
with the cleaner for your nearest Volta authorized 
Service Provider.

The clearing of a blocked hose  is not covered by 
warranty.

 

Water has entered the vacuum cleaner.

It will be necessary to replace the motor by an 
authorised Volta service agent. Damage to the 
motor caused by the penetration of water is not 
covered by the warranty.

 

Customer Information

 

Should you require service or consumable spares for 
your Volta cleaner, please consult the Blue Ribbon 
service providers listing enclosed with this cleaner, 
for your nearest Volta authorised service provider or 
contact the customer service help line noted on the 
last page of this instruction manual.
New filters and dust bags can be obtained from your 
Volta authorized service provider. Please specify 
model type when ordering spares.  

   
SAVE THESE INSTRUCTIONS

For repairs or accessories.

   

 

 

 

GUARANTEE / WARRANTY AND SERVICE 

PROVIDERS LISTING

Please refer to the Australian and New Zealand 
warranty conditions and customer record within this 
booklet, for Service and Spares, please consult the 
Blue Ribbon service providers listing enclosed with 
this product for your nearest service provider.

 

VOLTA

Features of the vacuum cleaner and accessories 
are protected abroad by registered patents of 
Registered Designs.
The appliance conforms with the requirements of 
the amended E.E.C, directive No 89/336 EEC relating 
to electromagnetic compatibility (EMC) CE.
The Electrolux group may introduce modifications 
to their product from time to time, and 
consequently the details given in this booklet are 
subject to alteration without notice.

Summary of Contents for Campus U4700











Reviews: