INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
VOLT
®
Solar Spotlight with Motion Sensor
VSAL-9003-BBZ
Install Stake
Install Fixture Body to Stake
2
3
- 4 -
Determine the desired
location for mounting the
stake mount. Hammer the
stake into the ground until
flange of stake is flush to
grade. To avoid damage to
the stake, place a board
on top of the stake while
hammering.
Note: If the ground is hard
and the stake is difficult to
install, make a crosscut in the
ground using a flat shovel.
Board
Ground
Stake
Thread the fixture body on to
the stake. Hand tighten until
snug. Make sure the sensor is
facing the desired area to be
monitored during installation.
NOTE: The light will illuminate
for 15 seconds after the sensor
trips. The sensor distance is
23ft with 1200 detection angle.
Fixture Body
Ground
Soil
Stake
Sensor
