INSTALLATION INSTRUCTIONS
VOLT
®
Floodlight with Motion Sensor
VFL-40XX-MS-ABZ
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
3
Make Connections of IR Sensor Wires
Refer to the wire connections illustration, connect wires from the
driver, the IR sensor and the supply cable by using wire connectors (not
included). Squeeze connectors with pliers to engage crimp connectors.
Back
Fixture
IR Sensor
Supply Cable
Connector
Wires
Brown Wire
from Sensor
Black Wire from
Supply Cable
Connector
Red Wire
from Sensor
Blue Wire
from Sensor
Red Wire from
Luminaire
Black Wire from
Luminaire
White Wire from
Supply Cable
4
Make Connections of IR Sensor Wires
Carefully tuck all the wires
inside of the back housing.
Place the backing with the
IR sensor back onto the
fixture and secure with
previously removed screws.
Hand tighten until snug with
a screwdriver.
Back Housing
Fixture
Screw
IR Sensor
