Install Mounting Bracket
Attach Fixture to Mounting Bracket
4
5
Wall Anchor
(sold separately)
Flat Washer
(sold separately)
Supply Wires
Fixture Chain
Self-tapping Screw
(sold separately)
Fixture Body
Mounting
Bracket
Mounting
Bracket
Ceiling
Quick Link
Ceiling Loop
Attach the mounting bracket
onto the desired ceiling surface.
Secure with the flat washers and
self-tapping screws.
Note: Wall anchors are
required for certain installation
conditions (concrete or brick
walls). Mark on the desired
ceiling surface for wall anchors
by using the holes on the
mounting bracket. Remove
the mounting bracket and drill
proper holes on the desired
ceiling surface and then insert
the wall anchors.
Adjust the fixture chain to the desired
length by removing the links if needed.
(Note: Pliers are required for this step).
With the fixture chain unattached to the
fixture loop on the top of the fixture body;
or the ceiling loop on the underside of
the mounting bracket, pull the supply
wires through the fixture chain alternating
between the links.
After the wires are through the fixture
chain, pull the supply wires up and around
the backside of the mounting bracket.
Attach one end of the fixture chain to the
fixture loop at the top of the fixture body.
Lift the fixture body and fixture chain up
and attach the other end of the fixture
chain onto the ceiling loop on the bottom of
the mounting bracket with the quick link.
The fixture will now hang safely. Close the
chain loop at the ceiling loop.
