background image

VOLT

® 

 All-Star

TM  

Mini

VAL-2001

Important: Please Read Before Installation

Important Safety Instructions

INSTALLATION INSTRUCTIONS

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1.  Turn off/unplug and allow to cool before reducing lamp.
2.  Lamp gets HOT quickly!
3.  Do not touch the hot lens, guard or cowl.
4.  Keep lamp away from materials that may burn. 
5.  Do not touch lamp at any time. 
6.  Use a soft cloth. 
7.  Oil from skin may damage lamp.
8.  Do not operate the fixture with a damaged or missing lens or shield.

!

!

w w w . v o l t l i g h t i n g . c o m

[email protected] • 813.978.3700

Package Contents

Parts Required

A.  (1) MR11 Lamp (sold separately)

Product Dimensions

Remove Glare Guard and Shield from Fixture

1

Glare Guard

Set 

Screw

Shield

Fixture

Unlock the set screw and remove the 

glare guard from the shield. Loosen 

the shield and remove it from the 

fixture. 

2.75”

4.5”

2.75”

1.75”

- 3 -

- 2 -

This luminaire is intended for installation in accordance with local codes and the 

National Electric Code (NEC). Failure to adhere to these codes and instructions 

may result in serious injury, property damage and void the warranty.

These instructions do not intend to cover all variations in installation, operation 

maintenance or mounting situations. 

1.  Make sure that the power is turned OFF before installing or servicing this 

luminaire. 

2.  WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or 

more from pool, spa or fountain.

3.  This luminaire is intended to be used only with a power supply 

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4.  Wiring connections must be made with wire connectors that are suitable 

for outdoor use.

5.  Position the low voltage wire and wire connector so that it is located 

within 6 inches (15.2 cm) from a building structure, a luminaire or fitting.

6.  The main low voltage cable is intended for shallow burial - less than 6 

inches (152 mm).

7.  If additional lengths of low voltage cable are required, please contact 

www.voltlighting.com or call 1-813-978-3700.

A.  Fixture
B.  Stake

Summary of Contents for VAL-2001 Series






Reviews: