INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
Install MR11 Lamp
Install Glare Guard and Shield to Fixture
2
3
Insert the lamp with the correct
wattage and type marked on the
fixture label.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
NOTE: DO NOT touch lamp with
bare hands. Use soft cloth to
handle lamp.
Attach the shield back onto the
fixture. Place the glare guard over
the shield and secure with the set
screw. Tighten until snug.
Socket
MR11 Lamp
(sold
separately)
Clear away an area in the ground
at the wireway slot on top of
the stake. Lay the luminaire
pigtail into the wireway slot and
screw the fixture onto the stake.
Tighten until snug.
Install Fixture to Stake
5
Fixture
Pigtail
Wireway Slot
Stake
Install Stake
4
Board
Stake
Soil
Ground
Determine the desired location for
mounting the fixture. Hammer the
stake into the ground until flange of
stake is flush to grade. To avoid damage
to the stake, place a board on top of
the stake while hammering.
NOTE: If the ground is hard and the
stake is difficult to install, make a
crosscut in the ground using a flat
shovel.
Glare Guard
Set
Screw
Shield
Fixture
- 5 -
- 4 -
VOLT
®
All-Star
TM
Mini
VAL-2001
