INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 6 -
[email protected] • 813.978.3700
- 7 -
Bulb Installation
Install MR16 Bulb
6
Insert the MR16 bulb with the
correct wattage and type marked
on the fixture label and secure
into place.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
MR16 Bulb
Socket
Install Lens
7
Place the lens back onto the
fixture body and rotate it until it
is secured properly.
Fixture Body
Lens
Install Glare Guard
8
Install the glare guard back onto
the fixture body and secure with
previously removed set screw.
Hand tighten until snug.
Fixture Body
Set Screw
Glare Guard
By using an Allen wrench, loosen
the set screw on the knuckle
and adjust the fixture body to
the desired direction. Once the
desired direction is achieved,
tighten the set screw to secure.
ROTATE
Adjust Fixture Direction
9
Fixture Body
Allen Wrench
Set Screw
Remove the glare guard and the lens to expose the MR16 bulb and replace it
with the correct wattage and type marked on the fixture label. Then,
reinstall the lens and the glare guard.
IMPORTANT: MR16 bulb must be protected from moisture and dust at all
times. Always reinstall the lens and the glare guard when removed.
Install/Replace Bulb
VOLT
®
All-Star
TM
Downlight
VAL-1814-40-BBZ
