INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
[email protected] • 813.978.3700
Install Base
2
Pull the supply wire through
the gap on the base. Attach the
base onto the tree by securing
with the screws. Tighten with a
screwdriver.
Place the supply wire through the base and thread the base onto the
fixture body. Make sure the gap on the base and the fixture body are
in the same direction. Tighten the lock nut against the base.
Fixture Body
Lock Nut
Supply Wire
Supply Wire
Tree
Base
Base
Screw
Gap
- 4 -
- 5 -
Install Fixture to Base
1
Remove Glare Guard
4
Loosen the set screw and remove
the glare guard from the fixture
body.
REMOVE
Fixture Body
Set Screw
Glare Guard
Remove Lens
5
Rotate the lens to remove it
from the fixture body.
Fixture Body
Lens
Wire Connection
3
Strip both leads from the luminaire
pigtail. Using two wire connectors (sold
separately), connect the leads from the
luminaire to the main supply cable leads.
Main Supply Cable
Wire Connectors
Fixture
Pigtail
VOLT
®
All-Star
TM
Downlight
VAL-1814-40-BBZ
