MORE AT WWW.VOLTPOLSKA.PL
(58) 341-05-06 | (58) 341-38-80 | (22) 100-42-99
INSTALLATION OF THE DEVICE
Please observe the warnings and notes in the previous section during process of
installation. In order to connect the device, first connect wires to the inverter and
then according to the polarity (+ and -) connect them directly to the battery. Correct
polarity of the input is very important and necessary, because reverse polarity may
damage the inverter and void the warranty. After proper connection press main
starting buton for 2-3 second to switch on the inwerter. To switch it off press button
again for 2-3 seconds.
When installing the inverter, be sure to choose right battery (type and capacity) for
direct connection of the device. Battery that is overloaded will have a much higher
capacity than the one supplied by the manufacturer and will be instantly discharged
or even damaged. We recommend using lead-acid batteries for continuous operation
such as GEL, AGM or good quality acid deep discharge batteries rather than regular
starter batteries.
TECHNICAL PARAMETERS
All SINUS inverters come with a range of safety features to ensure safe and rouble-
free operation.
•
Short-circuit protection
Thermal protection – switches off the device after about 60 - 70C
•
Undervoltage protection – switches off the device if the input voltage is too
low (discharge of the battery)
•
Overvoltage protection – switches off the device when the overheated
temperature is too high
•
Overload protection – turns off the device when it is overloaded for more
than dozen of seconds
•
Idle load – 300 mA
•
Control panel for switching ON/OFF in package with inverter
