[email protected] (58) 341-05-06 | [email protected] (58) 341-38-80 | [email protected] (22) 100-42-99
INTENDED USE
INSTALLATION
The eco solar boost -
Green Boost 3000
(DC 1210-350V)
is designed to
power heating devices such as boilers, heaters, electric heaters or heating
mats directly from PV panels.
The system requires: 4 to 9 typical PV panels (250W - 400W) connected in
series, with a total voltage from 120V to 350V.
Our inverter is equipped with internal maximum power protection of 3kW.
However, the total power of the panels connected to the inverter should not
be higher than 5kW.
Green Boost 3000
(DC 1210-350V)
allows to connect two heating devices
(e.g. two boilers). One will be heated first and the second one will be heated
only, if the thermostat of the first one stops receiving energy from the
inverter.This ensures that energy from the PV panels will not be lost when
one of the units reaches a set temperature.
Green Boost 3000
(DC 1210-350V)
is equipped with MPPT. Thanks to that,
the inverter will automatically adjust to the power of boiler and maximizes
the amount of energy drawn from PV panels.
To connect the PV panels to the inverter, use suitable PV installation cables
with a cross section not less than 4mm. Using wires that are too thin will
cause heating up and a voltage decreasing at the inverter input. In extreme
cases it can cause a fire.
The inverter requires unobstructed air circulation for proper operation. Do
not, under any circumstances, cover the ventilation holes as this may be a
direct cause of overheating and damage of the device.
To improve heat dissipation and for your own safety, we suggest to screw
the inverter vertically to nonflammable surfaces (concrete, metal).
