5
✓
The mounting surface must be sufficiently stable in order to withstand the
mechanical forces.
✓
Do not install the charging station at locations where falling objects could
damage the device (e.g. hung up ladders or automobile tires).
✓
The device must not be exposed to direct spray water (e.g. neighboring manual
car wash facility, high-pressure cleaner, garden hose).
✓
The device should be protected against direct rain as far as possible to prevent
icing, hail damage or similar.
✓
If possible, the device should be mounted protected from direct sunlight.
Otherwise, (e.g. set up outside at a parking space) the charging current
specification will be reduced to 16 A if the maximum permitted temperature is
exceeded. The charging procedure can also subsequently be switched off.
✓
Observe the permissible environmental conditions (see Technical data).
Observe the internationally valid installation standards (e.g. IEC 60364-1 and IEC
60364-5-52) and comply with the nationally applicable installation standards and
regulations.
2.5.
Space Requirements
In the case of device variants with optional cable holder, additional space must be
planned for at the bottom for hanging up the charging cable.
If several charging stations are installed adjacent to each other, a distance of at least 200
mm between charging stations must be complied with.
We recommend mounting the charging station
(height of the charging socket) at a height of 1.2-
1.4 m. Observe that national regulations can
limit this height.
For questions related to the surface for the
installation of this charging unit, due to the
weight and dimensions, it is suggested to
consult specialized architectural personnel
prior to its installation.
