12
➢
Pay attention to hole “2”
in figure 6. It is necessary to reserve enough
space for the manual operation of the cable lock release trigger.
2.
Insert five dowels into the 5 holes drilled in the edge of the wall mounting plate
(marked "1" in figure 6). Use the supplied screws or other appropriate fastening
materials to secure the installation plate to the wall.
3.
After attaching the installation plate to the desired location, the charging device
can now be attached to the backing plate (see the following illustration).
1
Mounting holes & joints
2
Manual cable lock release trigger & hole
*(not available for model 2.3
4.
Make special attention to the manual cable lock release trigger. Make sure the
trigger is correctly placed through the correspondent hole to guarantee the
correct function of the cable lock.
1
1
1
1
1
2
FIGURE 6 Fitting the device on the installation template
