Vollrath STOELTING Flavor Burst STL-40SS-JR, Equipment, Maintenance And Operations Manual

Page: 49 / 74

46
9. Scroll down to the Maintenance Functions
section and touch the key named “Flushing
Functions”.
10. Press the flavor line to be flushed and follow
the instructions outlined on the Touch Panel
to flush the syrup line until it is empty.
11. When the line is empty, press CANCEL and
disconnect the Pump Flush Adapter.
Connect the Pump Flush Adapter to the
next bag connector.
NOTE: THE FLUSH FUNCTION WILL
CONTINUE FOR 15 MINUTES. YOU MAY
STOP IT AT ANY TIME BY PRESSING
“CANCEL”.
12. Repeat Steps 10 and 11 for the second line,
then the third, and so on until all the lines
have been cleared of sanitizer solution.
13. When all lines have been emptied, return
the Pump Flush Adapter to the position
under the trays.
14. Ensure the Injector Assembly and the other
parts are stored in a sanitary place for the
off-season. When opening next season, be
sure to perform the Clean-In-Place
procedure again to sanitize all pumps
before recharging the system with syrups.
15. When opening next season, be sure to
perform the Clean-In-Place procedure again
to sanitize all pumps before recharging the
system with syrups.