O
peratOr
’
s
M
anual
4
ENGLISH
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the unit. Liquid inside the unit could cause
an electrical shock.
Electrical Shock Hazard!
If liquid spills or boils over onto the unit, immediately unplug the unit
and remove cookware. Wipe up any liquid with a padded cloth.
1. Place the induction-ready cookware containing food in the center
position of a hob.
NOTE:
Do not pre-heat empty cookware. Because of the speed and
efficiency of the induction range, cookware can very quickly
overheat and be damaged.
NOTE:
Do not drop cooking utensils or other objects onto the cooking
surface. The strong, non-porous surface can break. The
warranty does not cover this type of abuse.
2. Press the ON/OFF button. The power level display will light. The
power level LED will light. When an induction ready cookware pan is
placed on the heating surface, the display will remain on, indicating
the unit is heating.
WARNING
Burn Hazard.
Do not touch cookware, heating surface, food, or
liquid while heating.
Burn Hazard!
Hot food and liquids can burn skin. Induction heating surfaces heat very
rapidly. Use caution when adding pre-heated oil, liquid or other food
already in the cookware.
The unit is equipped with an “over-heating protection” feature. If the
temperature of the cooking surface becomes too hot, the unit will turn off.
The display will flash “F2” to indicate the unit is in “over-heating protection”
mode. After the unit has cooled, turn the cooking surface on and if “F2” is
not displayed, then cooking can resume.
The display window should remain constant during operation. If the
display is flashing, see the Troubleshooting section in this manual.
Removing cookware from the cooking surface for more than five minutes
will cause the unit to automatically turn off. Removing cookware for less
than five minutes will not interrupt operation of the unit.
The unit will start in Power Control Mode when it is turned on first time.
o
Peration
B
A
E
D
C
Control Panel Example
REAR POWER
FRONT POWER
2 X 3500 WATT @ 240V
2 X 3000 WATT @ 208V
B
A
E
D
C
B
A
E
D
C
Control Panel Example
POWER
TEMP
TIMER
B
A
E
D
C
H
G
F
Control Panel Example
A
E
I
Item 6950480 Front Control Panel
A
ON/OFF button. Press to turn unit on. An LED above the
control will illuminate when switched on (except for item
6950480).
B
POWER mode LED light. Illuminates when the power level is
displayed.
C
UP button. Used to increase the power level or time
depending upon the mode selected and model.
D
DOWN button. Used to decrease the power level or time
depending upon the mode selected and model.
I
