10
DIN-rail mounting of the INS-801/801W
The aluminum DIN-rail attachment plate should already
be affixed to the back panel of the Switch. If you need to
attach the DIN-rail plate, assure that the stiff metal spring
is situated towards the top. Attaching the Switch to the
DIN-rail is easy: just align and hook it over the top rail,
making sure that the metal spring (thin bent rod) is in
front of the rail edge as the rail edge bites into the space
behind
this spring, then press down and press the
Switch forward to snap into the bottom rail, as shown in
the figures below.
The set-up of the Switch can be performed after checking
the following facts:
•
The hanging structure must support at least 1.0 Kg
for the Switch.
•
The power outlet should be within 1.82 meters (6 feet)
