39-49
Determining shim thickness
The correct shim thickness determined by
deducting the specified bearing preload of 0.18
mm from the figure of 2.50 mm (example)
obtained from the measurement.
Example:
Dished washer thickness (1.50
mm)
+ dial indicator measurement
(example: 1.00 mm)
2.50 mm
- Bearing preload
- 0.18
mm
= Thickness of shim
2.32 mm
- Determine shim from table and fit onto drive
shaft. Table of shims
page 39-46
.
- Insert axial needle bearing and tighten socket-
head fastener including dished washer.
Tightening torque: 250 Nm (184 ft lb)
Note:
Insert axial needle bearing for input shaft before
tightening socket-head fastener. Installation
position
page 39-8
, Input gear, removing and
installing.
Page 9 of 12
Final drive, adjusting
12/6/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.4
WWW.ALL-TRANS.BY
