Volkswagen 000 071 105 J Installation Instructions Manual Download Page 3

GB

GB

General safety notes

Dear Customer,
We thank you for purchasing a Volkswagen Accessory 

bicycle carrier. Adhere strictly to the work procedures 

and safety notes described in the assembly and 

operating instructions. We accept no responsibility 

for damage caused through non-observance of the 

instructions.

The vehicle user is responsible to ensure their own 

vision and hearing are not impaired by the load and that 

the load does not adversely affect the driving condition 

of the vehicle. The vehicle user must ensure that the 

vehicle and the load are loaded correctly and that the 

road worthiness of the vehicle is not adversely affected. 

Prescribed lighting and lighting equipment must be 

¿

 tted 

and operational during daylight.
These assembly and operating instructions also contain 

the general type approval for the bicycle carrier for use 

with towing hitches and must always be carried in the 

vehicle.
Always observe the respective legislation for bicycle 

carriers in the country it is used in.

 

Caution

Adhere strictly to the work procedures and safety notes described in 

the assembly and operating instructions.
A bicycle carrier for a towing hitch is only suitable for the 

transportation of bicycles.
The bicycle carrier is not suitable for use offroad.
Check position, bolted connections and fastenings of bicycle 

carrier and bicycles for tightness after each assembly, before every 

journey and during longer journeys. Retighten if necessary. Repeat 

the checks at regular intervals, depending on the road surface/

conditions.
While driving, regularly check in rear view mirrors for possible 

undesired movement or shifting of bicycle carrier and/or bicycles.
For irregularities, drive on at vastly reduced speed to next possible 

stopping place and check, readjust and retighten all bolts and 

¿

 ttings on bicycle carrier and/or bicycles.

Non-observance may allow the bicycle carrier along with the 

mounted bicycles to loosen and detach from the vehicle and cause 

injuries to you, the occupants of the vehicle and/or cause an 

accident.

 

Caution

Moving parts, i.e. the threads of the screws of holders and quick-

release clamps must be cleaned and lubricated at regular intervals 

to prevent seizure of the rotary knobs.
Do not lubricate preassembled nuts, bolts or other threaded 

¿

 ttings. The nuts, bolts and other threaded 

¿

 ttings may loosen and 

the bicycle carrier and/or bicycles may become loose/fall off and 

endanger you and other persons, or cause an accident.

 

Caution

If a load (the bicycles) project more than 40 cm (15.7 inches) beyond 

the light surface of the side-marker light or tail light of rear carrier 

system, then the load must be marked by, at side with a white light 

facing forwards and a red light facing to rear and positioned at a 

maximum of 40 cm (15.7 inches) from its edge and a maximum of 

150 cm (4.9 feet) above the road surface.
When transporting bicycles which project, then mark wheels with 

extra markings.
When travelling at night, cover light re

À

 ectors, re

À

 ectors and wheel 

re

À

 ectors of bicycles so as not to distort rear light picture of vehicle. 

Not covering might otherwise hinder, deceive or endanger other road 

users.
Non-compliance may cause an accident.

 

Caution

Check function of lighting before starting a journey. The rear fog 

light on the vehicle must not light up when the rear fog light on the 

bicycle carrier lights up. Therefore both lights must not light up 

simultaneously.
For vehicles which have received an initial type approval after 

01.10.1998: the 

¿

 tted bicycle carrier or the carried load (the bicycles) 

may not cover/obscure the third brake light. The third brake light 

of the vehicle must be visible: along the left and right sides of the 

vehicle longitudinal axis – in a horizontal angle of 10°,  in relation 

upwards to the edge of the light – in a vertical angle of 10°,  in relation 

downwards to the edge of the light – in a vertical angle of 5°. If this is 

not possible then another replacement third brake light must be 

¿

 tted.

Non-compliance may cause an accident.

 

Caution

The 

¿

 tting of a bicycle carrier and the 

¿

 tting of bicycles to the 

carrier changes the handling, braking behaviour and the side wind 

sensitivity of the vehicle. Do not exceed the maximum permitted 

speed of 130 km/h (81 mph).
Do not cover the bicycles with tarpaulins or other protective covers 

as they change the wind-exposed areas which greatly affects the 

handling of the vehicle.
Position heavy loads in the luggage compartment as far forwards as 

possible to prevent an excess rear-end weight.
Always adjust your speed and driving to match prevailing road, 

traf

¿

 c and weather conditions and drive particularly carefully when 

bicycles are mounted.
Non-observance may allow the bicycle carrier along with the 

mounted bicycles to loosen and detach from the vehicle and cause 

injuries to you, the occupants of the vehicle and/or cause an 

accident.

 

Caution

Objects that are not secured, or are secured incorrectly, can 

cause serious injuries in the event of a sudden driving or braking 

manoeuvre or accident.
When the bicycle carrier is transported in the luggage compartment 

or the spare wheel well, then always secure the bicycle carrier with 

suitable lashings and/or securing straps to prevent it moving.

 

Note

The bicycle carrier is model dependently suitable for transportation in 

the spare wheel well, please request information, where appropriate, 

from your Volkswagen partner. To stow securely in the spare wheel 

well, use securing strap and securing element (part number: 

000 071 705 A) 

Ÿ

, see page 22.

Volkswagen Accessories recommends using the stowage bag (part 

number 000 071 226 A), to prevent scratches and abrasion marks.

 

Note

If the vehicle is equipped with an electrically operated tailgate/boot 

lid, ensure that there is suf

¿

 cient clearance when the bicycle carrier 

is mounted on the towing hitch. If possible, deactivate the electrically 

operated tailgate/boot lid and operate it only manually.
Remove bicycle carrier before using a car wash system. The bicycle 

carrier, the vehicle and/or the car wash system may receive serious 

damage.

Distributed by Volkswagen Zubehör GmbH   Printed in Germany by Volkswagen Zubehör GmbH  14.09.2017      -13-

 

GB

GB

Summary of Contents for 000 071 105 J













Reviews: