Volkswagen 000 071 105 J Installation Instructions Manual Download Page 12

Page: 12 / 12

-22-

Distributed by Volkswagen Zubehör GmbH Printed in Germany by Volkswagen Zubehör GmbH 14.09.2017

Figure 21

1. Slide rear light (1) lightly into holder (2), without it

engaging.

2. Route cable (3) into cable guide in holder (2).

Figure 22

1. Guide longer tab of cover (2) into wheel rail (1) and insert

cover (2) completely into holder (3).

2. Slide rear light completely into holder until locking

device (4) engages audibly.

Installing securing element and tensioning

strap in luggage compartment (when

transportation in spare wheel well is

required)

Figure 23

Note

If necessary, remove securing elements for spare wheel or

foam insert by turning 90° anticlockwise.

1. Insert securing element (13) into opening on floor of spare

wheel well, as shown, and turn it through 90° clockwise.

Thread tensioning strap (15) through securing element (13)

and ensure both sides of strap are of equal length.

Note

When the securing element (13) will not turn through 90°

by hand: insert a suitable screwdriver or other into the slot

and use it as a lever.

2. Place bicycle carrier into the spare wheel well and secure it

with tensioning strap.

The securing element and the tensioning strap are

available separately from your Volkswagen partner and are not

part of the items supplied.

Summary of Contents for 000 071 105 J













Search results

Summary of Contents for 000 071 105 J

Reviews:

Brands by name

Popular brands

Volkswagen 000 071 105 J, Installation Instructions Manual

Search results

Summary of Contents for 000 071 105 J

Reviews:

Brands by name

Popular brands