VolantexRC Ranger600, User Manual

Page: 8 / 12

8 / 12
Channels Reactions Checking
Place your plane in a neutral position, follow below steps to check the channels reactions.
Move the sticks(except the throttle stick) to see if all servo surfaces react correctly as
shown in the left diagram(left throttle for example). Swing your plane to check if all servo
surfaces react correctly as shown in the right diagram.
Swing The
Plane
Reaction
Transmitter
Operaton
Reaction
This airplane comes with one-key return function, which enable the plane to return by the
opposite direction that the plane takes off.
Follow below steps to activate the function.
1. Place your plane heading to the take-off direction.
2. Do
NOT
unlock the throttle, press the activation button and hold for several seconds
until you hear a "beep" sound, the rudder surface will respond, meaning the one-key
return function is now activated.
NOTICE: Every time when you power on the plane, it requires to activate the one-key
return function.
turn around automatically, back to the opposite direction where it takes off.
To quit, just press again the switch button, or control
any servo stick(rudder/elevator), the plane will back to
under manual control or gyro assist mode, when you
turn on the one-key return function, the plane will
enter gyro assist mode automatically to help stable
back to the what the control mode it was.
CAUTION: This function is bound to the receiver,
instead of to the transmitter, which means the plane will return ONLY to the opposite
direction that the plane takes off. It also means when the plane returns and passes the
position where you activated the function, the one-key return function will NOT return the
plane back to the take-off position.
One-key Return Instruction
One-key Return
Activation
One-key Return
Switch