13
Page
/ 15
Wireless Interface (WI) ELITE FCC
User Guide V1.0
GB
3. RADIO CONFIGURATION
3.1. Connection
The interface can be connected to the configurator using the USB socket on the top of the device. It must be linked to the USB socket of the
VOKKERO® ELITE configurator/charger. The USB cable comes supplied with your ap-pliance.
The WI icon will be displayed on the configurator’s home screen.
USB cable
USB socket
(Type A Female)
USB socket
(Type B Female)
3.2. Configuration with the VOKKERO® ELITE conference system
The WI interface must be configured at the same time as the other conference system equipment. If the WI interface is connected during the
quick config operation, it will then be configurated automatically and will be ready for use.
To find out how to launch the quick config operation on the configurator/charger, please consult the VOKKERO® ELITE conference system user
manual: XX (VOK_ELITE_FCC_UG)
At the end of the configuration of the WI interface with the ELITE conference system, it is mandatory to unplug the USB cable both sides (WI
interface and ELITE configurator) to enable WI audio functioning !
3.3. Antenna and usage requirements
This device is dedicated to professional users only and must be used only with the antenna supplied by VOGO. The reference of the antenna is
TLB-902 928-900LD-TNC
