U
SER
M
ANUAL
©
VOI
SPEED
L
TD
.
16
Some examples:
•
365
By dialling 365 the adapter will start a call to this number without waiting
any delay. This means that it will not be possible to make any calls to
numbers starting with 365. It is therefore recommended to add a delay
when specifying any rules similar to this (in this case of 2 sec): 365T2.
•
[1-8]xxx
Any four digit numbers between 1000 and 8999.
•
9xxxxxxx
Any 8 digit numbers starting with 9.
•
30x.T4
Any 3 digit numbers starting with 30. It is also important to add a timeout
at the end so that the adapter will start a call if no digits are entered
within the next 4 seconds.
All rules entered are displayed in the
Digital Map Table
.
To delete a rule you can simply select it from the drop down menu and press
Del
.
6.4.2
DSP config
Here you can configure the advanced settings relating to the devices connected to either
lines and the protocols used.
Select first the port whose advanced settings you want to modify and then click
Load
(Port1 is FXS1 and Port2 is FXS2). Below are the advanced settings for each port:
Coding Rule
Audio Codec used:
•
g711Alaw64k
•
g711Ulaw64k
•
g729
Input Volume
Incoming audio volume level (sent to the device
connected to the port).
Output Volume
Outgoing volume level (sent to the PBX).
Fax Mode
When a fax is connected to the port here you can
define the standard used:
•
Bypass-A
•
Bypass-U