Page 5
Kryo
Series Power Amplifiers
acoustics
Front Panel
1.
Power Switch
Used to turn the amplifier on or off.
2.
Power LED's
The top blue LED lights when the amplifier is switched on.
The lower amber LED lights when the amplifier is in stand-by mode and is
remotely activated via Ethernet.
3.
Level Controls
Used to control CH A, B, C and D's output level.
4.
Status LED's
SIG
When illuminated the signal LED's indicate an audio signal is present at the
channel's input.
TEMP
Indicates when temperature protection is active.
PRO
The protect LED's light up when the amplifier goes into protect mode.
See page 11.
LIMIT
The Limit LED's indicate when the ICL limiter is active. The limiter circuit
examines the audio output signal to prevent the amplifier from clipping.
See page 11.
1
CH A CH B CH C CH D
LIMIT
PRO
TEMP
SIG
LIMIT
PRO
TEMP
SIG
ON
POWER
STBY
Kryo K5.4
8
0dB
8
0dB
8
0dB
8
0dB
2
3
3
3
3
4
4