Page 4
Kryo
Series Power Amplifiers
acoustics
Features
Rugged, touring grade chassis. E.I.A. Standard 19" (48.3cm) rack-mountable.
Ultra compact and lightweight 2u design.
Super high frequency switch mode power supply.
Optional add on Modules extend operational capability.
Switchable (ICL) Intelligent Clip limiters prevent harmful signals from damaging loudspeakers.
Input link switches for linking channels.
Dual and Bridge modes for optimal load matching.
Switchable 30 or 50Hz Hi Pass filters on every channel.
Balanced XLR inputs with Speakon outputs.
Complete protection against shorted outputs, mismatched loads, overheating and DC input/output.
Three year warranty and guarantee.
Precautions
Although your amplifier is protected from external faults, the following safety precautions are recommended:
1.
Do not change the position of the bridge mode switch unless the amplifier is switched off.
2. There are important differences between Dual, Link and Bridge modes. Please refer to page 9
for a detailed description of the different modes and there uses.
3.
Switch off the amplifier or turn down the inputs before connecting to the in/out XLR's.
4. Do not short the ground lead of an output cable to the input signal ground. This will form a ground loop
and may cause oscillations.
5. Do not operate the amplifier from AC mains in excess of 10% variation above or below the selected line
voltage, and only at the specified line frequency.