VoiceCollect GmbH
Page 36
Voice
Collect
®
Technical Manual
Tab. 35, IR44CF II display
– Reading installation files from CF card
The following request appears:
Continue only if . .
Jumper P15 2-3 is ON
No Yes
No Ye>
Tab. 36, IR44CF II display
– Request for correct setting of jumper P15
Make sure the mainboard jumper P15, PIN 2-3 is set. If P15 PIN 2-3 is open, no software
update will take place. Instead the IR44CF II initial software will be loaded from the internal
flash memory (basic software version).
Option A: To cancel the update, e. g. you are not sure of the JP15 setting, press
>|
(Stop,
No).
Option B: To proceed with the update, press
|>
(Play, Yes).
If you pressed
|>
(Play, Yes), the update starts. The deletion messages of the flash
memory appear.
Erasing Flash . .
Sector 0
Tab. 37, IR44CF II display
– Deletion messages during update on the display
The following message indicates that the installation file is being written into the internal
flash memory.
Write ir44cf.bin . .
Sector 0
Tab. 38, IR44CF II display
– Writing installation file to flash memory
The message
Check ir44cf.bin
indicates that the IR44CF II checks the update for cor-
rectness.
A message like this appears if the update has been performed properly.
