11
pressed in the lock mode. Unlock the unit
using the procedure described above.
2. If the unit will not record or erase, check
your batteries by removing them and letting
the unit rest for at least one minute. Re-
install the batteries. If the unit still will not
record or erase, or the red LED is flashing
every few seconds it is likely that your
batteries are depleted. Replace batteries as
described above.
3. If your unit will not record or you hear two
beeps when you press the RECORD button
you are probably out of recording time.
Erase old messages.
4. If all the above are checked and corrected
and the unit still will not respond you may
need to initialize it. Important: All messages
and channel headers will be erased when
you follow this procedure. To initialize the
unit press and hold the Erase ALL button for
about 10-seconds until the red and green
LED’s flash simultaneously followed by ten
green flashes and beeps.
Summary of Contents for VT-300
Page 1: ...Instruction Book Voice It Personal Note Recorder Model VT 300 ...
Page 14: ...14 ...
Page 15: ...15 ...
