10
of the red LED. To unlock the unit, press and
hold the
button for five seconds or until you
hear a single beep accompanied by a single
blink of the green LED. The unit will be at the
first message in the default channel.
Turning Beeps On and Off:
Your unit is pre-
set at the factory to emit a variety of beeps when
using various functions. If you do not wish to
hear these beeps you may turn them off by
pressing and holding the
button for about
two seconds until the green LED flashes twice.
To turn beeps back on, repeat the procedure.
Two flashes of the green LED and two beeps
will indicate that the beeps are re-activated.
Troubleshooting
If your unit fails to respond as it should when
you press the buttons you should follow the
procedure outlined below to determine the
problem.
1. If none of the buttons will work check to
insure that the unit is not locked. The red
LED will flash once when any button is
Summary of Contents for VT-300
Page 1: ...Instruction Book Voice It Personal Note Recorder Model VT 300 ...
Page 14: ...14 ...
Page 15: ...15 ...