Page 4 of 15
Manual VENIA-6sp DDA - 2021-12 EN
Safety Instructions Active Electronics
Read these instructions.
Observe all warning instructions.
Follow all operating instructions.
To prevent fire hazard or risk of electric shock, do not use this device in the rain or in moist environments. Do
not operate the unit nearby the water.
Clean the unit only with a dry cloth.
Observe the instructions from the manufacturer for the mounting of the unit.
Do not mount the unit in the proximity of heat sources, such as heating units, herds or other heat radiation
devices.
Install the power cable at places where it cannot be damaged, especially at the sites of the socket, extension
cables and where it leaves the unit.
Never remove the safety device from the two terminal or grounding-type plug. A two-pin plug has two different
plug contact widths. An earth plug has two plug contacts and a third contact for earthing. The wider plug cont-
act or additional earth contact is for your safety. If the supplied plug size does not fit in your socket box, please
consult an electrician for exchanging the socket box.
Only use additional devices/accessory parts, that meet the manufacturer‘s instructions.
Pull the power plug out in case of storm or when you do not use your device for a longer period.
All maintenance works must be performed by qualified service staff. Maintenance is required when the unit has
been damaged, objects or fluids have leaked or fallen inside, when the unit was exposed to rain or humidity, or
in case of malfunctioning or when it has fallen on the floor.
Introduction
