Page 8 of 15
Manual VENIA-6sp DDA - 2021-12 EN
Introduction
Technical data
Components
LF: 4 x 6,5“ Neodym woofer with 1,8“ voice coil
HF: 3 x 1“ Neodym compression driver with 1,75“ voice coil
Frequency response
48 Hz - 19 kHz (- 10 dB)
80 Hz - 19,5 kHz (+/- 3 dB)
Coverage range (h x v)
100° x 0°/ -20°
Powerhandling
800 W AES / 1.600 W program / 3.200 W peak at 8 Ω
Sound pressure
128 dB SPL AES / 131 dB SPL program / 134 dB SPL peak
Dimensions / Weight
1.050 (H) x 213 (W) x 390 (D) mm / 32,9 kg
Finish
Polyurea coating in RAL 9005
Integrated 2-Way Amplifier Modul
Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω
Power output CH2
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω
Amplifier gain
CH1 32 dB, CH2/3 26 dB
Signal-to-noise ratio
>120 dB (20 - 20.000 Hz, 8 Ω)
Damping factor
>1.000 (8 Ω, 1 kHz)
Distortion
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω )
Integrated Loudspeaker Management System
Manual hand operation
2 button and 1 x digital encoder-wheel
Operable language
Selectable between English, German, France, Spain
Software connection
Bi-directional connection in real time via USB, Ethernet
Controllable units
Up to 128 self-powered Speaker & HDSP-amplifier in one network
DSP preset memory quantity
120 Presets
Processor
64 bit, 96 kHz sample rate
Dynamic range input
120 dB
Maximum input level
+ 23 dB
Latency
0,5 ms
Routing
2-input signals can mix together in one loudspeaker
EQ filter
10 parametric filter each In- and Output
X-Over
Butterworth, Bessel, Linkwitz-Riley
Limiter
In each Input and Output
