HDSP-Series Operating Manual
8
First steps
HDSP-Series
1.2 Rear connections - digital model
The quantity of connections differs for the HDSP models!
01. Power connection
1 x 16 A Neutrik Powercon IN.
Note: Disconnect the open device during maintenance work!
02. Ethernet connection
RJ45 jack for network connection The unit can be connected to the PC via a router with a 1:1 CAT.5 cable.
03. Digital input
3-Pin connector for digital Audio-input AES/EBU. Each input is a symmetric XLR-connector.
04. Digital output
3-Pin connector for digital Audio-output AES/EBU. Each output is a symmetric XLR-connector.
05. Analog input
Separate 3-Pin connector for Audio-input. Each input is a symmetric XLR-connector.
06. Analog output
Separate 3-Pin connector for Audio-output. Each output is a symmetric XLR-connector.
07. & 08. Speaker outputs
The 4-pole Speakon sockets are double occupancy.
HDSP-3, 6, 12
HDSP-4
HDSP-2
HDSP-02, 04
7
2+/2-, CH2, 800 W
1+/1-, CH3, 800 W
2+/2-, free
1+/1-, CH2, 800 W
1+/1-, CH2, 800 W
8
2+/2-, CH1, 2.400 W
1+/1-, CH2, 800 W
2+/2-, CH1, 2.400 W
1+/1-, CH2, 800 W
2+/2-, CH1, 2.400 W
2+/2-, CH2, 800 W
1+/1-, CH1, 800 W
4
1
6
5
3
8
7
2
Summary of Contents for HDSP-0.2A
Page 1: ...Operating Manual Voice Acoustic HDSP DSP Amplifier ...
Page 2: ......
